- Home
- ยป
- Our Products
- »
- Air Pollution Monitoring Instruments
Air Pollution Monitoring Instruments
Manufacturer of Air Pollution Monitoring Instruments (Ambient Air Monitoring Instrument, Ambient Pollution Instruments, Ambient Air Instruments, Respirable Dust Sampler with Gaseous Attachment, Fine Particulate Sampler PM2.5 & PM10, High Volume Sampler, Combo Dust Sampler PM2.5 & PM10, Stack Monitoring Kit…etc).
Ambient Air Monitoring Instruments
Minimum Order Quantity: 1 Piece
Usage/Application | Monitoring purpose,laboratory and industrial. |
Material | aluminium |
Brand | Greintech Instruments |
Color | white to gray |
Current | Nominal 220 V |
Flow Rate | Constant sampling rate of 1m3/hr unaffected by voltage fluctuation and filter choking maintained by |
Frequency | 50Hz AC mains supply |
Measuring Range | Omni-directional air inlet with PM 10 separation through an impactor followed by PM 2.5 separation |
Model Name/Number | GTI-FPS-375 |
With best usage of Ambient Air Monitoring Instruments we provide services regarding the pollution factors to our clients. Our expert team is highly skilled and provides excellent services to clients which are delivered with quick and useful output. Our Ambient Air Monitoring Instruments in the company enable clients to develop into more aggressive in the worldwide markets. These products are provided at reasonable prices as per standards. Further, our monitoring is accessed with the global standards expert advice and procedures and efficient utilization of resources applications.
Features:
- Weather proof design
- Superior functionality
- Low maintenance
FINE PARTICULATE SAMPLER (PM2.5/PM10)
Based on designs standardized by US-EPA.
Technical Specifications
- Particle Size: Omni-directional air inlet with PM 10 separation through an impactor followed by PM 2.5 separation through a WINS Impactor.
- Sampling rate: Constant sampling rate of 1m3/hr unaffected by voltage fluctuation and filter choking maintained by critical orifice system.
- Filter Media: Filter holder designed to accept any standard 47 mm diameter filter media.
- Sample Volume: Dry Gas meter records the total air volume sampled.
- Power Requirement: Single phase AC 220 Volts, 50 Hertz supply. Sampler unaffected by +/- 10% fluctuation in supply voltage.
FEATURES OF FINE PARTICULATE SAMPLER
- PM10 and 2.5 Impactors of sampler based on deigns standardized by US EPA.
- The APM 131 uses an oil free pump a low noise. Same instruments can be used for PM 10 and PM2.5 sampling.
- Lower sampling rate 1m3/hr reduces filter choking even in areas having high FPM levels.
- Critical orifice maintains constant sampling rate 1m3/hour.
- Compact and portable for convenient field operations.
Additional Information:
- Delivery Time: 15 days
- Packaging Details: pack with best quality material.
Ambient Air Instruments
Minimum Order Quantity: 1 Piece
Usage/Application | For Simultaneously monitoring of Particulate matter PM2.5 & PM10 or Gases SO2 and NO2 |
Material | Aluminum |
Brand | Greintech Instruments |
Color | white to gray |
Current | Nominal 220 V,Single Phase |
Flow Rate | 1.0m3 /hr (Constant Flow Maintained with the help of critical orifice). |
Frequency | 50Hz AC mains supply. |
Measuring Range | PM2.5 & PM10 |
Model Name/Number | GTI-CDS-401 |
Country of Origin | Made in India |
Features:
• Brushless blower reduces equipment downtime and maintenance effort.
• Significantly reduced Noise.
• Toolbox within the instruments.
COMBO DUST SAMPLER (PM2.5/PM10) with Gaseous Attachment Technical Specifications
• Flow Rate PM10:- 2.3m3 /hr (Constant Flow Maintained with the help of critical orifice).
• PM 2.5:- 1.0m3/hr (Constant Flow Maintained with the help of critical orifice).
• Particle Size: Particles of 10 microns and below collected on standard glass micro fiber filter paper of 47mm diameter fitted below single stage impactor. While particles of 2.5 microns are collected in a separate 47 mm diameter PTFE membrane filter fitted at the bottom of WINS impactor of two stage impactor
• PM10 Impactor: Single stage matching to European Design (according to EN12341).
• PM2.5 Impactor: Two stage as per USEPA Published Designs (Federal Register 40 CFR part 50).
• Flow Record: Independent Flow Dry Gas Meter for Pm10 & Pm2.5 streams to record volume sucked through filters accurately.
• Rotameter Flow Rate: - 0 – 3lpm measured using acrylic body flow meter with 2% FSD accuracy.
• Sampling Train: - Four Inlets and outlet manifold with built in needle valves for flow control of each inlet.
• Absorbers: - 4 Nos. of 35 ml. Borosilicate glass impingers with Ice tray.
Additional Information:
- Delivery Time: 15 days
- Packaging Details: Pack with best quality material thermocol and bubble polythene.
Ambient Pollution Instruments
Minimum Order Quantity: 1 Piece
Usage/Application | For monitoring of suspended particulate matter spm and gases SO2 & NO2 |
Material | Aluminium |
Brand | Greintech Instruments |
Color | Off white |
Flow Rate | 1.1 to 1.7 Cu m/min. free flow without Resistance. |
Frequency | 50Hz AC mains supply. |
Model Name/Number | GTI-HVS-173 |
Power Requirements | Nominal 220 V, Single Phase |
Power Source | Electronic |
Country of Origin | Made in India |
Additional Information:
- Item Code: GTI-HVS-173
- Production Capacity: 5 per week
- Delivery Time: 20
- Packaging Details: Packed with good quality material.
Air Pollution Monitoring Instruments
Minimum Order Quantity: 1 Piece
Automation Grade | Fully Automatic |
Usage | Industrial |
Color | White |
Power Source | Electricity |
Voltage | 220 V |
Country of Origin | Made in India |
Additional Information:
- Item Code: GRDS-133
- Production Capacity: 5
- Delivery Time: 10 days
- Packaging Details: pack with best material.